The hottest German kongart launched ultra-thin ind

Kongart launched embedded computer modules based on Intel Core ultra-thin industrial Mini

with leading technology. Kongart technology, a leading manufacturer of single board computers and EDMS customized services, expanded its successful module product field and launched the first industrial ultra-thin Mini itx master. The main version of conga-ic87 Mini itx is based on the fourth generation core single chip processor (code Haswell), with low power consumption with a maximum TDP of only 15 watts and a delivery period of more than 7 years

the flat design of the ultra-thin Mini itx main version and the 25mm high i/o block make it suitable for flat shells, such as tablet computers. With the launch of conga-ic87, kongat can better meet the challenges of high-demand customer support, including high-quality SBCs and long-term supply, and can handle common embedded requirements through customization, such as BIOS modification, boot screen replacement, special display and operating system compatibility, etc. Ultra thin min is not only beneficial to the protection of the environment and human health, the new professional single edition of i-itx appearance size combines the rich experience of kangjiate in integrating high-quality computer modules suitable for difficult environments and the price advantage of a large number of single edition production

core I series processors support aes-ni hardware encryption and avx2 accelerated vector multiplication instructions. Core i5 and i7 processors also support turbo boost 2.0 dynamic acceleration technology, amt9.5 management function and trusted execution technology (txt). Although Intel Celeron HD gen7 graphics only supports standard functions, powerful hd4400 (I3, i5) and hd5000 (i7) graphics can support graphics processing at frequencies up to 1000 MHz (Celeron, I3) and 1100 MHz (i5, i7). All processors support up to three independent displays, including 3840 x 2160 high resolution ＠ 60Hz, 4096 x 2304 high resolution ＠ 24Hz output through the display port, 1920 x 1200 high resolution ＠ 60Hz through HDMI, or the full 4K resolution (3840 x 2160 high resolution) of the core I series. This hardware supports or directly accelerates DirectX 11.1, OpenGL 3.2, OpenCL 1.2, plus high performance, flexible hardware decoder can decode multiple high-resolution Full HD videos at the same time. Two DisplayPort interfaces (dp++) are configured on the back of the motherboard; Following the thin Mini itx specification, an additional DisplayPort (EDP) and 2X24 bit LVDS can be realized through the internal disp connector

two sodimm sockets can be configured with up to 16GB sodimm ddr3l memory. Four USB3.0 ultra-high speed interfaces (downward compatible with USB2.0) are directly configured on the i/o baffle, and the other four USB2.0 interfaces can be connected through internal interfaces. Two 5 gb/s PCI Express 2.0 channels can be used as 1x MPIE half size, 1x PCIe full size (shared with PCIe X1 and msata) and 1x PCIe X1 (shared with msata/mpie). Four SATA interfaces up to 6 gb/s (one of which can be used as msata), plus Mini PCIe and SIM card slots, make the system expansion faster and more convenient. Two Intel i210 Gigabit Ethernet controllers provide a Gigabit Ethernet local area through two RJ45 slots. ACPI 5.0, I2C bus and LPC bus can easily integrate traditional i/o interfaces. The optional safe mode (TPM), real-time clock (RTC), Intel high-definition audio and 12 ~ 19 V universal power supply (optional 6 ~ 24 V) make its functions more complete

optional processor types:

about low freezing point, kongart

German kongart technology, an associate member of Intel intelligent systems alliance, headquartered in Deggendorf, Germany, is a leading supplier of standard embedded computer modules qsven, comexpress, XTX and ETX, and provides customized design services for single board computers and EDMS. Konka's special products can be widely used in industry and applications, such as industrial control, medical technology, automotive, aerospace electronics and transportation. The core of the company and its cooperation with parts manufacturers and automobile OEMs are getting closer and closer. The key technologies include unique and rich BIOS functions, comprehensive drivers and software support kits for boards. In the design process of their end products, users are supported by Konka's extended product life cycle management and special modern quality standards. Since its establishment in December 2004, kongart has become a globally recognized and trusted expert and partner in embedded computer module solutions. At present, kongart has branches in the United States, Taiwan, Japan, Australia, the Czech Republic and China. Please visit our official website for more information